When the power is disengaged from the magnet, it releases its hold on the armature plate and it returns to it normal state.
The unit requires a filtered and regulated DC power supply of the correct voltage to ensure the attraction of the armature plate is initiated. The unit operates on 12/24vDC and is complete with two build in SPST reed switch sensors for remove lock monitoring status and remote door monitoring status.
High Holding Force
Holding force 1,500Kg
Releases under Side Load Pressure
Magnet will release with up to 100Kg of side load pressure when the power is removed
Weight
1.3Kg
Magnet Body Dimensions
226mm(L) x 35.5mm(W) x 26.5mm(D)
Armature Plate (including bracket) Dimensions
226mm(L) x 35.5mm(W) x 25.7mm(D)
Multiple Voltage Input
Any voltage from 12vDC to 24vDC
Low Current Consumption
Volts Current
12vDC 240mA
24vDC 120mA
Dual Monitoring
Locking and door position
Early Warning Alarm EW Technology
Magnets are fitted with EW pressure sensors able to
send an alarm before access is gained. Also fitted
with buzzer.
Built-in MOV Surge Protection
Mortice mounting for concealed installation
Armature plate security bracket
No residual magnetism
ISO and TÜV tested
Patented
Approvals
EN61000-4-2:1995 + A1 (1998) + A2 (2001)
EN61000-4-3:2006 + A1 (2008)
EN61000-4-4:2004
EN61000-4-5:2006
EN61000-4-6:2007
EN61000-6-2:2005
EN61000-6-3:2007
EN50130-4:1996 + A1 (1998) + A2 (2003)
EN55022:1998 + A1 (2000) + A2 (2003)
FAQs
Why am I asked to take pack quantities
Helps for a quicker despatch time & also because we are not spending time re-packaging it keeps the cost down.
Is there a charge for delivery?
Carriage and packing are included in orders over £250.00. A charge of £10.00 is made on lower value orders to cover carriage, packing and insurance. For deliveries to Ireland please speak to the office for pricing.
Do you have any information on CE Marking or CE Marking of Doorsets?
Please refer to our technical section under Standards.